Powerful vapor and satisfying sessions are only a few quick and easy steps away with the Planet of the Vapes Lobo dry herb vaporizer. We’ll walk you through how to load it, set the temperature, and take a hit so that you’re primed and ready for a great experience. Follow along with your Lobo and let’s vape.
Quick summary
1. Plug it in and charge it.
2. Run a burnoff session.
3. Grind your herbs and load the oven.
4. Turn it on and set it 390°F / 198C°.
5. Take a hit once it vibrates.
6. Brush off the oven and screen when you’re finished.
What’s in the box
- 1 x POTV Lobo Vaporizer
- 1 x Dosing capsule
- 1 x Loading tool
- 1 x O-ring
- 3 x Replacement Screens
- 1 x Concentrate Pad (use with Lobo Dosing Capsule only)
- 1 x Cleaning brush
- 1 x USB-C Charge Cable
- 1 x User Manual
Fully charge the Lobo
Fully charge the POTV Lobo before we dive into our first session. Take the included USB-C charger and plug the vape into the nearest power source. The Lobo‘s screen will turn on and show its current charge. It will stop blinking when it’s full and ready to go.
Three-button controls
The Lobo vaporizer’s controls are very simple, and if you’re familiar with the ONE you’ll feel right at home. If not, no worries. These controls are easy to master.
Triple click the large power button to turn the vape on and off. Use the up and down buttons below it to select your temperature to the single degree.
Run a burnoff to cleanse it
Run your Lobo through a quick burnoff session to cleanse it of any manufacturing oils or residues before we load it. Triple click to turn it on, and use the Top temperature button to set it to 430F / 221C. Let it run its entire session until it automatically shuts off, and then you’re ready to go.
Grind your herbs and fill the oven
Just about any grind, from medium fine to coarse, will work with the Lobo. Once the burnoff is complete and the oven has cooled down a bit, take any grinder you have and shred up enough herbs to fill the oven.
Fill it up to the top so there’s a little mound and then give it a slight push so that it’s not overflowing along the edges. Make sure it’s still nice and loose and then slide the glass adapter into place.
Turn it on and set the temperature to 390°F / 198C°
Triple-click to turn the Lobo dry herb vaporizer on and use the two temperature control buttons to set it to 390°F / 290°C. It’ll vibrate once it hits temperature and then it’s ready to go.
Take a hit!
Once the vaporizer vibrates, take a short, gentle puff for just a few seconds to get a feel for it, and jump back in when you’re ready.
The Lobo is extremely versatile and will keep up with a variety of draw styles. Take your sessions slow with short, relaxed draws or chase massive clouds with long, intense hits. It’s up to you!
Brush the oven out after each session
Once you’re all finished with your session, take the included cleaning brush and clear the oven out of spent herbs. Brush anything off the glass adapter screen at the bottom as well. It’s best to do this while the oven is still warm so the herbs don’t settle and start to stick. Make it a habit to clean out the oven after every session to keep your Lobo vaporizer cleaner for longer.
